top of page

YACHT COATING

YACHT COATING INSPECTION FROSIO
New building and Dry dock inspection (Dry atmospheric, Immersed area)
YACHT COATING ADVISE
Topcoat System (Primer, Filler system, Undercoat, Topcoat)
YACHT INSPECTION
General Inspection (Corosion, Surface Preparation, Environment Control, DFT Control)
YACHT COATING
Tests and Measurements (DFT, Weather condition, Shore D hardness, Sanded surfaces, Gloss, DOI, Colour, Mottling, Orange peel, Tension, Dullness)
FROSIO CERTIFIED
FROSIO CERTIFIED

•Pre-preparation surface condition (ISO 8501-1)

•Condition after preparation (ISO 8501-1)

•Condition after localised removal of previous coatings (ISO 8501-2)

•Surface defects (ISO 8501-3)

•Water jetting (ISO 8501-4)

•Detection of salts and dust (ISO 8502: 2-3)

•Weather conditions (ISO 8502-4)

•Sampling of impurities - The Bresle method (ISO 8502-6)

•Surface roughness (ISO 8503)

•Wet and dry film thickness (ISO 2808)

•Film thickness by destructive means (ASTM D4138)

•Adhesion - Cross cut test (ISO 2409)

•Adhesion - Pull-Off test (ISO 4624)

•Holiday detection (ASTM D5162)

•Curing of zinc ethyl silicate (ASTM D 4752)

REPORTS BASED ON ICOMIA AND ISO STANDARDS

ISO 2813, Paints and varnishes — Determination of specular gloss of non-metallic paint films at 20°, 60° and 85°

ISO 7724-1, Paints and varnishes — Colorimetry — Part 1: Principles

ISO 7724-2, Paints and varnishes — Colorimetry — Part 2: Colour measurement

ISO 7724-3, Paints and varnishes — Colorimetry — Part 3: Calculation of colour differences

Inspection of coating defects and performance

Blistering  [ISO 4618:2006, 2.28]

Blooming  [ISO 4618:2006, 2.30]

Chalking  [ISO 4618:2006, 2.39]

Coating system  [ISO 4618:2006, 2.53]

Cratering  [ISO 4618:2006, 2.64]

Flaking  [ISO 4618:2006, 2.110]

Flexibility  [ISO 4618:2006, 2.116]

Flow [ISO 4618:2006, 2.120]

Gloss  [ISO 4618:2006, 2.128]

Hardness  [ISO 4618:2006, 2.133]

Haze  [ISO 4618:2006, 2.134]

Orange peel [ISO 4618:2006, 2.163]

bottom of page