MARINE COATING

IMG_5871.JPEG
New building and Dry dock inspection (Dry atmospheric, Immersed area)
IMG_5855.JPEG
Tank coating (FWT, Ballast, Chemical etc.)
IMG_6103.JPEG
General Inspection (Corosion, Surface Preparation, Environment Control, DFT Control)
IMG_5938.JPEG
Tests and Measurements (DFT, Weather condition, Shore D hardness, Sanded surfaces, Gloss, DOI, Colour, Mottling, Orange peel, Tension, Dullness)
frosio.png
FROSIO CERTIFIED 

•Pre-preparation surface condition (ISO 8501-1)

•Condition after preparation (ISO 8501-1)

•Condition after localised removal of previous coatings (ISO 8501-2)

•Surface defects (ISO 8501-3)

•Water jetting (ISO 8501-4)

•Detection of salts and dust (ISO 8502: 2-3)

•Weather conditions (ISO 8502-4)

•Sampling of impurities - The Bresle method (ISO 8502-6)

•Surface roughness (ISO 8503)

•Wet and dry film thickness (ISO 2808)

•Film thickness by destructive means (ASTM D4138)

•Adhesion - Cross cut test (ISO 2409)

•Adhesion - Pull-Off test (ISO 4624)

•Holiday detection (ASTM D5162)

•Curing of zinc ethyl silicate (ASTM D 4752)

Image by Hanna Obersteller
REPORTS BASED ON ICOMIA AND ISO STANDARDS

ISO 2813, Paints and varnishes — Determination of specular gloss of non-metallic paint films at 20°, 60° and 85°

ISO 7724-1, Paints and varnishes — Colorimetry — Part 1: Principles

ISO 7724-2, Paints and varnishes — Colorimetry — Part 2: Colour measurement

ISO 7724-3, Paints and varnishes — Colorimetry — Part 3: Calculation of colour differences

Inspection of coating defects and performance

Blistering  [ISO 4618:2006, 2.28]

Blooming  [ISO 4618:2006, 2.30]

Chalking  [ISO 4618:2006, 2.39]

Coating system  [ISO 4618:2006, 2.53]

Cratering  [ISO 4618:2006, 2.64]

Flaking  [ISO 4618:2006, 2.110]

Flexibility  [ISO 4618:2006, 2.116]

Flow [ISO 4618:2006, 2.120]

Gloss  [ISO 4618:2006, 2.128]

Hardness  [ISO 4618:2006, 2.133]

Haze  [ISO 4618:2006, 2.134]

Orange peel [ISO 4618:2006, 2.163]